BG_MT_F405_FC_p1
BG_MT_F405_FC_p2

Matek F405-OSD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for SBUS Input

SG$39.09

In stock

SKU: MT_F405_OSD_FC Categories: , Tags: , ,

Product Description

Matek Systems F405+OSD BetaFlight STM32F405 Flight Controller Built-in Inverter for SBUS Input

Specification:

  • Brand: Matek Systems
  • Item name: Flight Control Board
  • Size: 36x36mm
  • Mounting hole: 30.5mm
  • Weight: 7g
  • MCU: 168MHz STM32F405
  • IMU: 32K ICM20602 accelerometer/gyro (SPI)
  • Support 32K Gyro update & 16K PID Loop
  • OSD: BetaFlight OSD w/ AT7456E chip
  • Blackbox: MicroSD card slot (SD/SDHC)
  • VCP, UART1, UART2, UART3, UART4, UART5
  • Built in inverter for SBUS input (UART2-RX)
  • PPM/UART Shared: UART2-RX
  • Support SoftSerial on S5 & S6
  • Battery Voltage Sensor: 1:10
  • Currsnt Sensor: No (FCHUB-6S option)
  • BEC 5V & 10V: No (FCHUB-6S option)
  • LDO 3.3V: Max.300mA for Spektrum RX
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes

 

Features:

  • 2x LEDs for FC STATUS (Blue, Red)
  • 6x PWM / DShot outputs without conflict
  • 5x UARTs
  • 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Sginal/GND
  • 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
  • 1x Side-press button for BOOT(DFU) mode
  • 1x 16pin bottom mounted FFC Slot for FCHUB-6S connection

 

Package included:
  • 1x flight control board
  • 1x 0.5mm*16Pin 5cm Flexible Flat Cable
  • 4x M3 Anti-vibration Standoffs

 

Tips:

  • The default setting for Dshot idle percentage was changed in the new BF version. Pls change the Motor idle throttle value back to 5~6.5, so as not to get the ESC desync.
  • If you use the SD BlackBox and get some issues. Pls type “set sdcard_dma = off” in CLI, Type”Save”.  It is an open issue https://github.com/betaflight/betaflight/issues/2631    Default SD_DMA is OFF in BF3.2.0_RC4 or newer fw.
  • Enclosed rubber anti-vibration standoffs are necessary to avoid the vibration woes.
  • If you use the 5V VTX(e.g. Unify Pro), Pls power the VTX from the 5V pad on FCHUB.  The ribbon cable can’t bear heavy current. You can also use one pair of silicon wires to connect F405 5V & G pads with FCHUB.
  • If Gyro 32kHz & PID loop 16kHz,   Blackbox logging rate 1kHz Max.
  • SD Card, FAT32  C10, 1~32G,  But max.4G space can be used in Blackbox.
  • Spektrum satellite BIND_PIN on RX4

Matek F405-OSD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for SBUS Input
Matek F405-OSD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for SBUS Input

Matek F405-OSD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for SBUS Input
Matek F405-OSD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for SBUS Input
Matek F405-OSD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for SBUS Input
Matek F405-OSD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for SBUS Input

Matek F405-OSD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for SBUS Input
Matek F405-OSD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for SBUS Input

Matek F405-OSD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for SBUS Input

Matek F405-OSD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for SBUS Input
Matek F405-OSD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for SBUS Input
Matek F405-OSD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for SBUS Input

Two methods to get the Frsky telemetry working, No.1 or No.2

Update your XSR with latest firmware.  

No.1. Enable SoftSerial_TX on S5 or S6 pad

  • Don’t need to break the RX cover. Use the inverted TLM signal on the socket.
  • Type “resource motor 5 none” in CLI, ENTER,
  • Type “resource serial_tx 11 A15” in CLI, ENTER
  • Type “Save”, ENTER
  • Connect the inverted telemetry signal to S5 pad

MATEK_F405-OSD_p11 MATEK_F405-OSD_p12

 

Press & hold the boot button & connect the USB to your computer.

Then release the button, the FC will enter the Boot Mode.

MATEK_F405-OSD_p13

 

dav

HUBOSD8-SE_EN

Reviews

There are no reviews yet.

Be the first to review “Matek F405-OSD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for SBUS Input”

Your email address will not be published. Required fields are marked *